diff --git a/ports/espressif/boards/kavrous_pixelwing_esp32s3/board.c b/ports/espressif/boards/kavrous_pixelwing_esp32s3/board.c
new file mode 100644
index 00000000000..a3a9eec0471
--- /dev/null
+++ b/ports/espressif/boards/kavrous_pixelwing_esp32s3/board.c
@@ -0,0 +1,9 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "supervisor/board.h"
+
+// Use the MP_WEAK supervisor/shared/board.c versions of routines not defined here.
diff --git a/ports/espressif/boards/kavrous_pixelwing_esp32s3/mpconfigboard.h b/ports/espressif/boards/kavrous_pixelwing_esp32s3/mpconfigboard.h
new file mode 100644
index 00000000000..3f887711906
--- /dev/null
+++ b/ports/espressif/boards/kavrous_pixelwing_esp32s3/mpconfigboard.h
@@ -0,0 +1,19 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2019 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#pragma once
+
+// Micropython setup
+
+#define MICROPY_HW_BOARD_NAME       "Kavrous PixelWing ESP32S3"
+#define MICROPY_HW_MCU_NAME         "ESP32S3"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO48)
+
+#define MICROPY_HW_LED_STATUS (&pin_GPIO35)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO47)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO21)
diff --git a/ports/espressif/boards/kavrous_pixelwing_esp32s3/mpconfigboard.mk b/ports/espressif/boards/kavrous_pixelwing_esp32s3/mpconfigboard.mk
new file mode 100644
index 00000000000..aca05fa6c3b
--- /dev/null
+++ b/ports/espressif/boards/kavrous_pixelwing_esp32s3/mpconfigboard.mk
@@ -0,0 +1,10 @@
+USB_VID = 0x1209
+USB_PID = 0x4DF7
+USB_PRODUCT = "PixelWing ESP32S3"
+USB_MANUFACTURER = "Kavrous Tech"
+
+IDF_TARGET = esp32s3
+
+CIRCUITPY_ESP_FLASH_MODE = qio
+CIRCUITPY_ESP_FLASH_FREQ = 80m
+CIRCUITPY_ESP_FLASH_SIZE = 8MB
diff --git a/ports/espressif/boards/kavrous_pixelwing_esp32s3/pins.c b/ports/espressif/boards/kavrous_pixelwing_esp32s3/pins.c
new file mode 100644
index 00000000000..8dc19a8256b
--- /dev/null
+++ b/ports/espressif/boards/kavrous_pixelwing_esp32s3/pins.c
@@ -0,0 +1,23 @@
+// This file is part of the CircuitPython project: https://circuitpython.org
+//
+// SPDX-FileCopyrightText: Copyright (c) 2020 Scott Shawcroft for Adafruit Industries
+//
+// SPDX-License-Identifier: MIT
+
+#include "shared-bindings/board/__init__.h"
+
+static const mp_rom_map_elem_t board_module_globals_table[] = {
+    CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_LED), MP_ROM_PTR(&pin_GPIO35) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_GPIO21) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_GPIO47) },
+
+    { MP_OBJ_NEW_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_GPIO48) },
+
+    { MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
+    { MP_ROM_QSTR(MP_QSTR_STEMMA_I2C), MP_ROM_PTR(&board_i2c_obj) },
+};
+MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);
diff --git a/ports/espressif/boards/kavrous_pixelwing_esp32s3/sdkconfig b/ports/espressif/boards/kavrous_pixelwing_esp32s3/sdkconfig
new file mode 100644
index 00000000000..e9628662160
--- /dev/null
+++ b/ports/espressif/boards/kavrous_pixelwing_esp32s3/sdkconfig
@@ -0,0 +1,14 @@
+#
+# Espressif IoT Development Framework Configuration
+#
+#
+# Component config
+#
+#
+# LWIP
+#
+# end of LWIP
+
+# end of Component config
+
+# end of Espressif IoT Development Framework Configuration