[nxp-ran]

拉取/合并请求描述：(PR description)

[

为什么提交这份PR (why to submit this PR)

针对专门开发工业以太网的用户，专门订制了一套CM33+CM7的link file
其中CM33运行在片内ram上，CM7从flash直接XIP

你的解决方案是什么 (what is your solution)

新增了2个keil的分散加载文件，和2个iar的分散加载文件：
cm33\board\linker_scripts\MIMXRT1189xxxxx_cm33_ram_industry.scf
cm33\board\linker_scripts\MIMXRT1189xxxxx_cm33_ram_industry.icf
cm7\board\linker_scripts\MIMXRT1189xxxxx_cm7_flexspi_nor_industry.scf
cm7\board\linker_scripts\MIMXRT1189xxxxx_cm7_flexspi_nor_industry.icf

并且在对应的Kconfig和rtconfig.py中添加对这些分散加载文件的支持。

最后，在keil和iar对应的template中增加对应的target。

请提供验证的bsp和config (provide the config and bsp)

• BSP:

• .config:
  CM33:
  CONFIG_BSP_LINKER_SCRIPT_RAM_INDUSTRY=y
  CM7:
  CONFIG_BSP_LINKER_SCRIPT_FLEXSPI_NOR_INDUSTRY=y

• action:

]

当前拉取/合并请求的状态 Intent for your PR

必须选择一项 Choose one (Mandatory):

• 本拉取/合并请求是一个草稿版本 This PR is for a code-review and is intended to get feedback
• 本拉取/合并请求是一个成熟版本 This PR is mature, and ready to be integrated into the repo

代码质量 Code Quality：

我在这个拉取/合并请求中已经考虑了 As part of this pull request, I've considered the following:

• 已经仔细查看过代码改动的对比 Already check the difference between PR and old code
• 代码风格正确，包括缩进空格，命名及其他风格 Style guide is adhered to, including spacing, naming and other styles
• 没有垃圾代码，代码尽量精简，不包含#if 0代码，不包含已经被注释了的代码 All redundant code is removed and cleaned up
• 所有变更均有原因及合理的，并且不会影响到其他软件组件代码或BSP All modifications are justified and not affect other components or BSP
• 对难懂代码均提供对应的注释 I've commented appropriately where code is tricky
• 代码是高质量的 Code in this PR is of high quality
• 已经使用clang-format 源码格式化工具确保格式符合RT-Thread代码规范 This PR has been formatted with clang-format and complies with RT-Thread code specification
• 如果是新增bsp, 已经添加ci检查到.github/ALL_BSP_COMPILE.json 详细请参考链接BSP自查

[github-actions]

👋 感谢您对 RT-Thread 的贡献！Thank you for your contribution to RT-Thread!

为确保代码符合 RT-Thread 的编码规范，请在你的仓库中执行以下步骤运行代码格式化工作流（如果格式化CI运行失败）。
To ensure your code complies with RT-Thread's coding style, please run the code formatting workflow by following the steps below (If the formatting of CI fails to run).

---

🛠 操作步骤 | Steps

1. 前往 Actions 页面 | Go to the Actions page
   点击进入工作流 → | Click to open workflow →

2. 点击 Run workflow | Click Run workflow

• Use workflow from 保持默认分支（通常为 master）
  Keep the default branch (usually master) in Use workflow from
• 在 branch 输入框填写 PR 分支 feature/industrial-ethernet-linkfile
  Enter PR branch feature/industrial-ethernet-linkfile in the branch field
• 设置需排除的文件/目录（目录请以"/"结尾）
  Set files/directories to exclude (directories should end with "/")

3. 等待工作流完成 | Wait for the workflow to complete
   格式化后的代码将作为独立提交推送至你的分支。
   The formatting changes will be pushed to your branch as a separate commit.

完成后，提交将自动更新至 feature/industrial-ethernet-linkfile 分支，关联的 Pull Request 也会同步更新。
Once completed, commits will be pushed to the feature/industrial-ethernet-linkfile branch automatically, and the related Pull Request will be updated.

如有问题欢迎联系我们，再次感谢您的贡献！💐
If you have any questions, feel free to reach out. Thanks again for your contribution!

[Copilot]

🟡 Changes recommended

Industrial layouts leave generated Keil targets unbuildable, reference missing GCC linker scripts, and omit CM7 XIP caching when multicore support is disabled.

3 open issues

• Reject unsupported GCC industrial layouts before linking · New
• Populate sources and build settings for the selected Keil target · New
• Enable XIP caching for the industrial layout without multicore · New

What changed in this PR

Adds industrial Ethernet memory layouts to the RT1180 EVK BSP, with CM33 running from internal RAM and CM7 executing directly from NOR flash.
为 RT1180 EVK BSP 新增工业以太网内存布局：CM33 在片内 RAM 运行，CM7 从 NOR Flash 直接执行。

Changes / 变更：

• Adds Keil and IAR linker scripts with separate per-core memory allocations and reserved shared memory. / 新增 Keil 和 IAR 链接脚本，划分双核专用内存并预留共享内存。
• Connects the layouts to Kconfig, build configuration and IDE targets. / 将新布局接入 Kconfig、构建配置和 IDE 目标。
• Moves MPU setup before common board initialization and refreshes saved configurations. / 将 MPU 配置提前至通用板级初始化之前，并更新保存的配置。

Paths below are relative to bsp/nxp/imx/imxrt/imxrt1180-nxp-evk/.
以下路径均相对于上述目录。

File	Description
cm7/​template.uvprojx	Adds Keil industrial XIP target. / 新增 Keil 工业 XIP 目标。
cm7/​template.uvoptx	Adds target debug settings. / 新增目标调试设置。
cm7/​template.ewp	Adds IAR industrial XIP configuration. / 新增 IAR 工业 XIP 配置。
cm7/​rtconfig.py	Maps industrial linker and target names. / 映射工业链接脚本及目标名称。
cm7/​rtconfig.h	Refreshes version and generated comments. / 更新版本及生成的注释。
cm7/​board/​linker_scripts/​MIMXRT1189xxxxx_cm7_flexspi_nor_industry.scf	Defines Keil CM7 flash/RAM layout. / 定义 Keil CM7 Flash/RAM 布局。
cm7/​board/​linker_scripts/​MIMXRT1189xxxxx_cm7_flexspi_nor_industry.icf	Defines IAR CM7 flash/RAM layout. / 定义 IAR CM7 Flash/RAM 布局。
cm7/​board/​Kconfig	Exposes industrial XIP choice. / 增加工​​业 XIP 选项。
cm7/​board/​board.c	Reorders MPU initialization. / 调整 MPU 初始化顺序。
cm7/​.config	Refreshes configuration; new layout remains disabled. / 更新配置，新布局默认未启用。
cm33/​template.uvprojx	Adds Keil industrial RAM target. / 新增 Keil 工业 RAM 目标。
cm33/​template.uvoptx	Adds target debug settings. / 新增目标调试设置。
cm33/​template.ewp	Adds IAR industrial RAM configuration. / 新增 IAR 工业 RAM 配置。
cm33/​template.ewd	Adds IAR debugger configuration. / 新增 IAR 调试器配置。
cm33/​rtconfig.py	Maps industrial linker and target names. / 映射工业链接脚本及目标名称。
cm33/​rtconfig.h	Refreshes version and generated comments. / 更新版本及生成的注释。
cm33/​board/​linker_scripts/​MIMXRT1189xxxxx_cm33_ram_industry.scf	Defines Keil CM33 TCM/OCRAM2 layout. / 定义 Keil CM33 TCM/OCRAM2 布局。
cm33/​board/​linker_scripts/​MIMXRT1189xxxxx_cm33_ram_industry.icf	Defines IAR CM33 TCM/OCRAM2 layout. / 定义 IAR CM33 TCM/OCRAM2 布局。
cm33/​board/​Kconfig	Exposes industrial RAM choice. / 新增工业 RAM 选项。
cm33/​board/​board.c	Reorders MPU initialization. / 调整 MPU 初始化顺序。
cm33/​.config	Refreshes configuration; new layout remains disabled. / 更新配置，新布局默认未启用。

_{Review effort: Balanced}